Welcome to the Quick Start Guide for Auto-Builder! This guide will help you get up and running with our powerful tool in no time.

Prerequisites

Before you start, make sure you have the following prerequisites:

  • A basic understanding of Linux command line
  • Python 3.x installed on your system
  • Access to a terminal or command prompt

Installation

To install Auto-Builder, follow these steps:

  1. Clone the repository from GitHub:
    git clone https://github.com/yourusername/auto-builder.git
  2. Navigate to the repository directory:
    cd auto-builder
  3. Install the required dependencies:
    pip install -r requirements.txt
  4. Run the setup script:
    ./setup.sh

Configuration

After installation, you need to configure Auto-Builder for your project. Here's a brief overview of the configuration options:

  • Project Directory: Specify the directory where your project is located.
  • Build Commands: Define the commands to build your project.
  • Build Output: Set the directory where the build output should be stored.
  • Build Dependencies: List any dependencies required for building your project.

Usage

Once configured, you can use Auto-Builder to automate the building process. Here's how to use it:

  1. Run the build command:
    auto-builder build
  2. The build process will start, and you can monitor the output in the terminal.
  3. Once the build is complete, the output will be stored in the specified directory.

Troubleshooting

If you encounter any issues, check the following:

  • Ensure that all prerequisites are met.
  • Verify that the configuration file is correctly formatted.
  • Check the build output for any error messages.

For more detailed troubleshooting, visit our FAQ page.

Next Steps

Now that you've set up Auto-Builder, you can start automating your build process. Explore the following resources to learn more:

Happy building!

Auto-Builder Logo